2004-2008 上海交通大学 博士

2010- 上海交通大学  助理研究员、副教授、教授

2012-2013  挪威科技大学 访问研究员

固态/液氢储氢系统设计与工艺
氢液化换热器
换热器仿真优化与强化传热
制冷温控系统
航空航天热设计
储能与海洋能源
高效换热器及能源系统
相变流动传热机理与模拟

2025-2028 国家自然科学基金
2024-2026 高效传热机理及设计，工信部子课题，主持
2024-2026 能源系统动态仿真，主持
2021-2015 基础重大专项，主持
2023-2024 “储氢换热器仿真优化”，主持
2023-2024 飞机辅助冷却系统国产化关键技术，主持
2024-2024 大型液化装置制冷换热设备选型评价研究，主持
2023-2028 “多相流强化传热与换热器仿真软件、优化设计”，主持
2020-2023 国家自然科学基金，主持
2023-2024 空调智能节能和节能仿真，主持

【论文】
【】Li X. Numerical model of aerial drop characteristic of mass firefighting units for aerial firefighting. Fire Safety Journal. 150 (2024) 104263
【】Lin D. et al. Offshore methanol synthesis process by CO2 hydrogenation. 2024
【10】Hui Y, Li X, Lei R, et al. Boiling heat transfer characteristics of distributed jet array impingement on metal foam-covered surface[J]. International Journal of Heat and Mass Transfer, 2024, 233: 126038.
【9】Hui Y, Li X, Lei R, et al. Boiling heat transfer characteristics of distributed jet array impingement on metal foam covers with different wettability[J]. International Journal of Refrigeration, 2024, 167: 90-101.
【8】Chang S.J. et al. Numerical investigation on heat transfer characteristics of cascaded PCM heat sinks for thermal management. Journal of Energy Storage. 2024
【7】Li Y, Hu H, Lei R. Dynamic modelling of supplemental cooling systems with vapor compression refrigeration units in civil aircrafts[J]. Applied Thermal Engineering, 2024, 248: 123285.
【6】LI X. et al. Performance Analysis of a Vapor Injection Linear Compressor in a Dual-Temperature Zone Refrigerator. International Journal of Refrigeration, 2024, 162: 74-85.
【5】Hui Y. et al. Boiling heat transfer characteristics of confined jet impingement on metal foam with different structures. Applied Thermal Engineering. 2024: 123554.
【4】Hu et al. Numerical investigation on propane flow condensation in zigzag channel of printed circuit heat exchanger. Applied Thermal Engineering. 2024: 123645.
【3】LI Y. et al. Dynamic Modelling of Supplemental Cooling Systems with Vapor Compression Refrigeration Units in Civil Aircrafts. Applied Thermal Engineering. 2024, 248: 123285.
【2】Chang S.J. et al. Experimental study of novel paraffin-fatty acid eutectic mixtures for thermal management of electronic devices. Journal of Energy Storage, 84, Part A, 15 April 2024, 110846.
【1】 Hui Y. et al. Experimental investigation on confined jetimpingement boiling heat transfer characteristics on metal foam cover. Applied Thermal Engineering Volume 236, Part D, 10 January 2024, 121806.

Li Y. et al. Performance simulation and diagnosis of faulty states in air-cycle refrigeration systems in civil aircrafts. International Journal of Refrigeration, Volume 156, December 2023, Pages 232-242.
Yuhan Li, Rui Lei, Haitao Hu, Kangzuo Zhao. A black box based model for phase change heat exchanger in refrigeration system simulations using Kriging interpolation method. International Journal of Refrigeration. 2023, 153, 231-239.
Hu H, Chang S, Li Y, et al. Design and thermal characteristic test of a temperature control system for spacecraft precision instrument[J]. International Journal of Refrigeration, 2023, 146: 462-470.
Hu H, Zhao Y, Sheng J, et al. Influence of surface wettability on heat transfer and pressure drop characteristics of R1234ze (E) flow boiling in metal foam filled tubes[J]. International Journal of Refrigeration, 2023, 146: 366-374.
Hu H, Li J, Li Y, et al. Experimental investigation on flow boiling characteristics in offset strip fin channels under different sloshing conditions[J]. Experimental Thermal and Fluid Science, 2023, 145: 110880.
Li Y, Hu H, Sun H, et al. Dynamic simulation model for three-wheel air-cycle refrigeration systems in civil aircrafts[J]. International Journal of Refrigeration, 2023, 145: 353-365.
Hu H, Li Y, Li J. Experimental investigation on flow boiling characteristics in zigzag channels under different sloshing conditions[J]. Applied Thermal Engineering, 2023, 230: 120780.
Research progress on flow and heat transfer characteristics of fluids in metal foams. Renewable and Sustainable Energy Reviews, Volume 171, January 2023, 113010.

Duan Z, Sun H, Wu C, et al. Flow-network based dynamic modelling and simulation of the temperature control system for commercial aircraft with multiple temperature zones[J]. Energy, 2022, 238: 121874.
Duan Z, Sun H, Wu C, et al. Multi-objective optimization of the aircraft environment control system based on component-level parameter decomposition[J]. Energy, 2022, 245: 123330.
Yuhan Li, Haitao Hu, et al. DYNAMIC SIMULATION MODEL FOR THREE-WHEEL AIR-CYCLE REFRIGERATION SYSTEMS IN CIVIL AIRCRAFTS. International Journal of Refrigeration, 2022 (https://doi.org/10.1016/j.ijrefrig.2022.08.026).

[9] Haitao Hu, et al. Measurement and correlation for two-phase frictional pressure drop characteristics of flow boiling in printed circuit heat exchangers. International Journal of Refrigeration, Volume 129, September 2021, Pages 69-77.
[8] Haitao Hu, et al. Heat transfer and pressure drop of refrigerant flow boiling in metal foam filled tubes with different wettability. International Journal of Heat and Mass Transfer, Volume 177, October 2021, 121542
[7] Haitao Hu, Zhancheng Lai, et al. Droplet shedding characteristics on metal fibers with different wettability and inclined angles. International Journal of Refrigeration. 2021. (Accepted,DOI: 10.1016/j.ijrefrig.2021.05.030; Available online 25 May 2021)
[6] Haitao Hu, et al. Influence of surface wettability on pool boiling heat transfer on metal foam covers. International Journal of Thermal Sciences, Volume 168, October 2021, 107069 (DOI: 10.1016/j.ijthermalsci.2021.107069)
[5] Haitao Hu, Li J, Xie Y, et al. Experimental investigation on heat transfer characteristics of flow boiling in zigzag channels of printed circuit heat exchangers[J]. International Journal of Heat and Mass Transfer, 2021, 165: 120712.
[4] Haitao Hu, Li J. Experimental investigation on heat transfer characteristics of two-phase flow boiling in offset strip fin channels of plate-fin heat exchangers. Applied Thermal Engineering, 2021, 185: 116404.
[3] Jianrui Li, Haitao Hu, Youhu Zhang. Experimental investigation and correlation development for two-phase pressure drop characteristics of flow boiling in offset strip fin channels. International Journal of Thermal Sciences, 2021, 160:106693
[2] Li J, Hu H, Xie Y, et al. Two-phase flow boiling characteristics in plate-fin channels at offshore conditions[J]. Applied Thermal Engineering, 2021, 187: 116595.
[7] 赵雅鑫，胡海涛等. R1234ze(E)在泡沫金属管内的流动沸腾换热和压降特性. 化工学报，2021（网络首发时间：2021-06-11）
[6] 胡海涛，赖展程等. 泡沫金属结构对流动沸腾换热特性的影响. 制冷学报，2021.4 （网络首发时间：2021-04-20）
[5] 王兆奇;李孟山;胡海涛等. 双排对折型微通道换热器仿真模型开发。化工学报，2021（S1）
[4] 谢瑶;李剑锐;胡海涛. 印刷电路板式换热器内超临界甲烷流动换热特性模拟. 化工学报，2021（S1）
[3] 张弛;李浩;胡海涛等. 基于自动特征工程的客机压缩机轴承故障诊断研究. 化工学报（封面论文），2021（S1）: 430-436
[1] **孙浩然, 吕中原, 吴成云, 等. 机载补气增焓制冷系统动态仿真模型[J]. 化工学报, 2021: 10-15.

2020年【2篇】
[11] Hu, H. Zhao Y. et al. Experimental investigation on nucleate pool boiling heat transfer characteristics on hydrophobic metal foam covers. Applied Thermal Engineering, 179 (2020) 115730.
[10] Haitao Hu, Jianrui Li, Yao Xie, Yongdong Chen. Experimental investigation on heat transfer characteristics of flow boiling in zigzag channels of printed circuit heat exchangers. International Journal of Heat and Mass Transfer, 2020.
[9] Jianrui Li, Haitao Hu, Youhu Zhang. Experimental investigation and correlation development for two-phase pressure drop characteristics of flow boiling in offset strip fin channels. International Journal of Thermal Sciences, 2021, 160:106693
[8] Jianrui Li, Haitao Hu, Haoxian Wang. Numerical investigation on flow pattern transformation and heat transfer characteristics of two-phase flow boiling in the shell side of LNG spiral wound heat exchanger. International Journal of Thermal Sciences, 152 (2020) 106289.
[6] Yuxin FU，Alain VALTZ，Snaïde AHAMADA，Haitao HU，Christophe COQUELET. Density data for carbon dioxide (CO2) +trans-1,3,3,3-tetrafluoroprop-1-ene (R-1234ze(E)) mixture at temperatures from 283.32 to 353.02K and pressures up to 10MPa. International Journal of Refrigeration 120 (2020) 430–444.
[5] 李阳, 常守金, 胡海涛, 孙浩然, 赖展程, 2020. 飞行器机载精密仪器温控系统性能的实验研究. 化工学报, 71(S1), 77-82.
[4] 密晓光, 陈杰, 余思聪, 等. LNG 绕管式换热器壳侧两相流动压降特性的实验研究[J]. 制冷技术, 2018, 1.
[3] 吴静玮 张弛 胡鸣鹤 李剑锐 孙浩然 胡海涛 魏文建. 晃荡工况下板翅式换热器封头内两相流分配模拟. 制冷技术. 2020,(05), 16-21, 28
[2] 魏文建 常守金 丁二刚 胡海涛. 不同结构风冷换热器风侧特性对比分析. 制冷技术. 2020,(05) 53-57
[1] 张弛 胡海涛 魏文建 毛英超. 制冷剂在近三角形微通道内流动沸腾特性的模拟分析. 制冷技术. 2020,(03) 18-23。52476013

1）课程名称：工程设计     授课对象：本科生；
2）课程名称：工程与社会  授课对象：本科生；
3）课程名称：制冷原理及设备 授课对象：本科生；
4)  课程名称：流体力学泵与风机   授课对象：本科生；

专利：一种可用于超低温制冷的嵌入式平板蒸发器
专利：一种偏心式套管换热器
专利：一种强化自然对流的圆盘式超低温蒸发器
专利：一种小型超低温生物样本库制冷系统
专利：一种带有折弯结构的水平安装多孔分配器
专利：一种多排翅片管换热器性能快速仿真与设计方法
专利：一种基于热管散热的机载精密测量仪器温控装置
专利：一种基于图论的大型客机辅助冷却系统仿真建模方法
专利：一种基于数据驱动和模型的制冷系统制冷剂泄漏探测方法
专利：一种基于局部线性化理论的变频补气压缩机性能计算方法
专利：一种配管以及具有该配管结构的大型冷箱；授权号：ZL 201720257477.7（排1）；
专利：一种气液分配部件以及具有该部件的封头和板翅式换热器,CN201720193179.6
专利：一种除霜过程中室内不间断制热的空调系统,CN201510189288.6
专利：一种适用于摇晃工况的板翅式换热器,CN201820136502.0
专利：一种改善液体分布不均的板翅式换热器,CN201820137127.1
专利：CO2-油混合物跨临界循环换热测量装置；授权号：ZL 2009 1 0050459.1 （排1）；
专利：基于泡沫金属强化沸腾换热的芯片冷却装置；授权号：ZL 201210100441.X （排1）。
专利：一种空调器无水加湿装置；授权号：ZL 2014 10101113.0 （排1）；
专利：气泡导流满液式壳管蒸发器；授权号：ZL 2015 21008655.X（排1）；
专利：具有气道的满液式壳管蒸发器；授权号：ZL 201521010330.5（排1）；
专利：一种多源耦合的二氧化碳地源热泵系统；授权号：ZL 201410735908.7（排1）；
专利：一种防液击空调除霜系统；授权号：ZL 201510287888.6（排1）；
专利：基于弓形折流板的管壳式换热器；授权号：ZL 201620548167.6（排4）。

《制冷技术》，常务副主编；
上海市制冷学会副秘书长、理事 /编译委员会副主任；
压力容器换热器委员会，委员
国际制冷大会，分会场主席
国际制冷学会会员

期刊审稿专家：
Applied Energy; Energy
International Journal of Thermophysics
International Journal of Heat and Mass Transfer；
Physics of Fluids;
Journal of Heat Transfer；
International Journal of Multiphase Flow;
International Communications in Heat and Mass Transfer；
Applied Thermal Engineering,
 International Journal of Refrigeration, 
International Journal of Thermal Science

省部级奖励
教育部科技进步奖
中国机械工业科技进步一等奖
上海市科技进步一等奖
中国制冷学会科技进步一等奖
中国制冷学会科学技术青年奖
上海市科技进步二等奖